13
Chapter 1 Product Profile
|
Hillstone
Hillstone SG-6000 X-Series Hardware Reference Guide
Power Module
Four power modules with a power of 650W can be installed in SG-6000-X7180. You
must install two AC (or DC) power modules to power the device. If every slot of
device are installed with expansion module, please install at least 3 AC (or DC) power
modules. You can install a third and fourth power module in the device to offer
redundancy. When four power modules are installed in the device, you are suggested
to connect two of the power modules to a power source and connect the other two to
a different power source. This can ensure that when a power source fails, the other
power modules powered by the different source can begin to work immediately. If you
want to install the SSM-200, QSM-200 or IOM--200 module to the device,
please install at least 3 AC (or DC) power modules.
The power modules are inserted in the power expansion slots (PS0 - PS3) of the rear
panel.
Notes:
♦
The standby power supply module is hot-swappable.
♦
Hillstone suggests not using AC and DC power supply modules meanwhile in
one device.
Figure 1-16: AC Power Module
Figure 1-17: DC Power Module
Ports
The ports available for Hillstone SG-6000-X7180 are Console port, Auxiliary port, USB
port, SFP port and XFP port. This section explains the attributes of each port.
