6
Operation
Operating Instructions
Important:
Rinse the inside of the bottle with
warm water and thoroughly dry before use.
Before using with any chemicals familiarise
yourself with the sprayer by trialing it first
with water only, then thoroughly dry the
sprayer. Thick mixtures can clog the spray
nozzle. Mixtures of this kind should be strained
to prevent blockages. Clean the bottle,
attachments and your hands thoroughly
after use.
Before Use
• Remove the internal pump assembly by
unscrewing the container cap. Fill liquid
to the required level.
Do not exceed the
“MAXIMUM FILLING” level.
• Insert internal pump assembly and tighten
container cap firmly by hand.
• Make sure the safety valve and hose retainer
cap are tight to prevent air escaping.
• Firmly screw the lance assembly to the
trigger handle.
Operation
• Pump the sprayer until the safety valve starts
to open and vent. Your sprayer is designed to
operate at 40 P.S.I. (275 kpa). You will notice
that when the sprayer is at full pressure
the safety valve will lift and a red indicator
becomes visible.
• Pump periodically to maintain constant
spraying pressure.
• Lock pump handle into container cap. This
allows you to carry the sprayer. You can also
use the strap assembly supplied. Attach this
by threading the key rings through the strap
holes located either side of the top of the
bottle.
• Start spraying by pressing the on/off trigger.
The trigger is equipped with a lock for
continuous spraying. To lock, press the trigger
and slide the trigger lock forward. To unlock,
slide the trigger lock back and release the on/
off trigger.
• Choose the type of nozzle according to
your spraying application. Turn the nozzle to
obtain the desired spray pattern.
455644_HH2359_5L_8L_Heavy_Duty_Manual.indd 6
29/10/2015 3:43 pm
