7
Operation
After Use
• When you have finished, release pressure
from the bottle by slowly pulling up the
safety valve and holding until all air has
been released.
Do not release pressure by
unscrewing the container cap.
• After you have ensured the sprayer contains
no pressure, unscrew the container cap.
Safely and carefully dispose of any liquid left
inside the bottle. To clean your sprayer, rinse
the bottle with appropriate solution, then fill
the bottle with clean warm water to the 2L
level, pressurise your sprayer and allow it to
empty. Thoroughly dry before storage.
• Check that the nozzle is free from sediment.
If necessary, repeat the process until the
sprayer is clean.
• If sprayer has been used with chemicals,
safely discard any unused solution in
accordance with the chemical supplier’s
instructions.
Storage
• Make sure that the sprayer is not pressurised
and contains no liquid. Do not store in
direct sunlight and store out of reach of
children and animals. Refer to detailed safety
instructions on page 3.
455644_HH2359_5L_8L_Heavy_Duty_Manual.indd 7
29/10/2015 3:43 pm
