manualshive.com logo in svg

Hill-Rom Volara PVL1, Руководство пользователя

Поделиться
Скачать
Hill-Rom Volara PVL1 Скачать руководство пользователя страница 95

Volara™ System, Model PVL1 User Manual (196286 REV C) 

 87

Expected Life

EXPECTED LIFE

The expected service life for the control unit is five years from its date of 
purchase.

The expected service life of the single patient use circuit is 30 days of 
treatment or 90 treatment sessions.

The expected service life of the battery is one year from its date of 
purchase.

NOTE:

For proper disposal, make sure to follow your local, state, or country 
electronic and battery regulations to safely discard or recycle the Volara™ 
System, parts, and batteries.

SERVICE CALLS

WARNING:

Warning

—Only authorized persons should service the Volara™ System. 

Service by unauthorized persons could cause personal injury or 
equipment damage.

If service is necessary, use this contact information:

•

In the USA, call a Hill-Rom representative at: 800-426-4224.

•

Outside the USA, contact your distributor or a local Hill-Rom 
representative or go to www.respiratorycare.hill-rom.com.

NOTE:

When contacting a Hill-Rom representative regarding the Volara™ System, 
be prepared to provide the serial number from the product identification 
label. The label is on the back of the control unit.

When you provide the serial number, the Hill-Rom representative can 
identify your unit and give you the information you need more quickly.

196654__C_2019-Apr-29_Cleaned

Содержание Volara PVL1





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды