manualshive.com logo in svg

Hill-Rom Volara PVL1, Руководство пользователя

Поделиться
Скачать
Hill-Rom Volara PVL1 Скачать руководство пользователя страница 108

100

Volara™ System, Model PVL1 User Manual (196286 REV C) 

Specifications

F

EDERAL 

C

OMMUNICATIONS 

C

OMMISSION 

(FCC) C

OMPLIANCE 

S

TATEMENT 

<This section is pending further updates from C&S. To be updated in 

Phase 3 after certification submission.>

NOTES:

•

This system may not cause harmful interference,

•

This system must accept any interference received, including 
interference that may cause undesired operation.

FCC Caution

•

Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to operate 
this equipment.

•

This equipment should be installed and operated with the minimum 
distance 20 cm between the radiator & your body.

Part 15B compliance statements for digital devices:

NOTE:

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference 
in a residential installation.

This equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of 
the following measures:

•

Re-orientate or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

196654__C_2019-Apr-29_Cleaned

Содержание Volara PVL1





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды