manualshive.com logo in svg

Hill-Rom Volara PVL1, Руководство пользователя

Поделиться
Скачать
Hill-Rom Volara PVL1 Скачать руководство пользователя страница 17

Volara™ System, Model PVL1 User Manual (196286 REV C) 

 9

Safety Instructions

SAFETY INSTRUCTIONS

When using electrical products, especially when children are present, 
basic safety precautions should always be followed, including the 
following important safeguards.

READ ALL INSTRUCTIONS 

BEFORE USING

Training shall be provided by a Hill-Rom qualified trainer or respiratory 
therapist before the user uses the system for therapy delivery.

WARNING:

Obey all 

warnings 

throughout the manual and also those below to 

help prevent injury and/or equipment damage: 

•

Warning

—Only facility-authorized persons should open and 

service this system.

•

Warning

—Federal USA law restricts this product to sale by or on 

the order of a physician. Sale by or on the order of unauthorized 
persons can cause patient injury. 

•

Warning

—We recommend your first use of this product be in a 

supervised setting such as a doctor’s office or at home with a 
clinical trainer.

•

Warning

—This system should only be used by trained persons.

•

Warning

—Use this product only for its intended use as described 

in this manual. Do not use attachments not recommended by the 
manufacturer. 

•

Warning

—Do not operate this system if it shows any signs of 

physical damages, faulty conditions, or malfunction (e.g. 
damaged power cord or plug, dropped, dropped in water, or if 
the touchscreen does not operate). 

•

Warning

—Do not use the system near to any heat source or 

ignition source such as a fireplace or radiant heater. 

•

Warning

—Never drop or insert any object into any opening or 

hose. 

•

Warning

—Adult supervision is required to use the therapy on 

children.

•

Warning

—Close supervision throughout the treatment is 

necessary when this product is used by children or patients with 
physical limitations or impaired cognitive abilities.

196654__C_2019-Apr-29_Cleaned

Содержание Volara PVL1





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды