6
7EN125103 Rev. 13 • 2020
www.hillrom.com
Overhead
view
Lateral view
CSP
(Central Suspension Point)
*
Min. distance from ceiling to CSP at max. lifting height.
**
Installation dimensions: the distance between the attachment point for the lift unit on the carriage and the CSP at max. lifting height.
*** Lifting interval: the distance between max. lifting height and min. lifting height measured in CSP.
Measurements in mm.
C
A
B
H**
D*
L***
A
B
C
D*
H**
L***
264 295 210
443
308
1600
Ceiling
A
B
C
D*
H**
L***
10.4 11.6 8.3
17.4
12.1
63.0
Measurements in inch.
Dimensions
Guidance and manufacturer’s declaration – electromagnetic emissions
The overhead lift is intended for use in the electromagnetic environment specified below. The customer or the user of the
overhead lift should assure that it is used in such an environment.
”Essential performance according to the manufacturer: The lift shall not move unintentionally while being submitted to
disturbances.”
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The overhead lift uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The overhead lift is suitable for use in all establishments inclu-
ding domestic establishments and those directly connected
to the public low-voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/ flicker emissions
IEC 61000-3-3
Complies
EMC Table
