23
7EN125103 Rev. 13 • 2020
www.hillrom.com
The lift doesn’t work.
1. Check that the Emergency Stop button is not
activated.
2.
Check that the battery is charged.
3. Check that the hand control is correctly
connected.
4. Try to lower the lift, the limit switch might be
engaged.
5.
If the lift still does not work satisfactorily,
please contact Hill-Rom.
The lift emits a repeated sound or
light signal.
1. Charge the battery immediately.
2.
If the lift still does not work satisfactorily, please
contact
Hill-Rom
.
The lift is stuck in the
high position.
1. Check that the Emergency Stop button is not
activated.
2. Check that the battery is charged.
3. Check that the hand control is correctly con-
nected.
4.
Use indicated electrical or mechanical emer-
gency lowering to lower the patient onto a firm
surface.
5.
If the lift still does not work satisfactorily, please
contact
Hill-Rom
.
You hear unusual sounds.
Please contact Hill-Rom.
Simple Troubleshooting
