Hill-Rom 2040005, Руководство по обслуживанию

Страница: 59 / 104

Service Manual Viking™M mobile lift • 3EN370401 Rev. 19 59 www.hill-rom.com
l
www.liko.com
Control Unit CBL, by S/N
Kontrollbox CBL S/N-styrd
Assembly Instruction
Monteringsanvisning
Prod. No. 20490039
© Copyright Liko AB
www.liko.com
NOTE
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/ Liko and using original Liko spare parts.
A.
To activate IR control: Hold the hand control
IR about 20 cm/0.8 inch. from the control unit’s
IR receiver and press the large UP and DOWN
buttons on the hand control simultaneously for
about 2 seconds. A signal is heard when the
function is activated. The lift is now ready to
use with Hand control IR.
B. Check to determine if other lifts in the room
are affected by your hand control. If they are:
Use the large UP and DOWN buttons on the
operation panel of the lift that is to be used.
Press both buttons simultaneously until a
signal sounds. The lift has now been assigned
a unique communication code. Now, activate
IR control according to procedure A, above.
/
8.
5.336
- Charger cable; socket 1
- Lift motor cable ; socket 2
- Base-motor cable ; socket 3
1
3
”click”
7.
2
5.336