Hill-Rom 2040005, Руководство по обслуживанию

Страница: 5 / 104

Service Manual Viking™M mobile lift • 3EN370401 Rev. 19 5 www.hill-rom.com
l
www.liko.com
2.2
Technical Data
Maximum load: 205 kg (450 lbs)
Material:
Aluminium
Weight:
Total weight: Heaviest part
:
34.0 kg (75 lbs) 15.3 kg (34 lbs)
Wheels: Front: 75 mm (3 inch.) twin wheels.
Rear: 75 mm (3 inch.) twin wheels with brakes.
Turning diameter:
1400 mm (55.2 in)
Em. Lowering: Manual and electrical
Lifting interval: 1270 mm (50.0 in)
Lifting Speed
(no load):
42 mm/s and 38 mm/s, respectively
( 1.7 in/s and 1.5 in/s, respectively)
Sound Level: 46 dB(A)
Protection Class: IP 54
Op. Forces
of Controls:
HandControl: 4 N
Operation Panel: 4 N
HandControl
IR
Batteries: 2 AAA LR03 1.5 V.
Reach: 2 m (80 in)
Electrical Data: 24 V
Intermittent
operation:
Int. Op 10/90, active operation max 2 min. Only
10% of a given length of time may
be active, yet no more than 2 min.
Batteries: NiMH cells, 2.2 Ah. New batteries provided by the
supplier.
Battery
Charger:
CBL20001, built-in, 100-240 V AC,
50-60 Hz, max 600 mA.
Lift Motor: Permanent magnet motor with mechanical safety
mechanism; 24 V,
8.5 A
Motor for
base-width
adjustment: Permanent magnet motor
24 V, 6 A
The device is intended for use indoors
Type B, in accordance with the electrical shock protection class.
Class II equipment.
Viking™ M mobile lift, Prod. No. 2040015
Amax.* Amin.* B B1 B2 B3***
C D
D2** E* F F1 Lmax* Lmin* M N O
max. min. max. min.
2020
1970
1920
1440
1390
1340
1230 870 660
650
650
595
1110 690 970 560 195
1100
1050
1000
105 30
1790
1740
1690
520
470
420
385 220 495
Measurement in mm
Top view
Lateral view
B
B1
F F1
A
max.
B2
Amin.
**600 mm (24 in)
E
M
N
O
Max. reach position of lift arm
B 3
Lmin
L
max
C
D 2
D
Max. reach position of lift arm
D1
**700 mm (28 in)
Note: The measurements are based on the lift being equipped with standard sling bar and standard wheels. When changing to other lifting accessories, or
other wheels, check that the lift still achieves desired lifting height.
*
Different measurements apply to Viking M depending on the height-setting position, see ”Assembly”, in the Instruction Guide.
** Reference measurement according to Standard EN ISO 10535:2006.
Measurement in inch.
A max.* A min.* B B1 B2 B3***
C D
D2** E* F F1 Lmax* Lmin* M N O
max. min. max. min.
79.5
77.6
75.6
56.7
54.7
52.8
48.4 34.3 26.0
25.6
25.6
23.4
43.3 27.2 38.2 22.0 7.7
43.3
41.4
39.4
4.2 1.2
70.5
68.5
66.5
20.5
18.5
16.5
15.2 8.7 19.5