7
ASSEMBLY INSTRUCTIONS
Hardware Used
1
2
x 4
E
J
F
H
K
G
Hardware Used
Bolt (6*15mm)
M
N
M
Bolt(6*45mm)
x 8
Washer (M6)
x 4
P
Washer (M6)
x 8
O
E
G
hole1
hole2
H
F
(NOTE: Don’t put the Bolts on too tight.)
(NOTE: Don’t put the Bolts on too tight.)
NOTE: It is best to assemble the fire pit with two people.
1.Connect Side Pannle (E,F,G,H) with Bolt (6*30mm)/
Washer (M6)(M) as shown in Figure 1 using Wrench.
(make sure that holes1,2 can be found on the side panle
and assemble as Figure 1, the two holes help fix the Gas
Tank Bracket and Gas Tank Support in the Step 2.)
2.Connect Gas Tank Bracket (J) to the holes located at the
bottom of Side Panels E and F using 2- Bolt (6*15mm)/
Washer (M6)(N). Then slide ends of Gas Tank Support(K)
onto the right side of the Gas Tank Bracket (J) and align the
2 holes on the front of the Gas Tank Support(K) with the 2
holes in the Door Frame (H) and secure it to the bottom piece
of the Door Frame using 2- Bolt (6*15mm)/Washer (M6)(N).
Nut (M6)
x 8
