Screwdriver
Qty
.
HARDWARE CONTENTS
3
M
N
Bolt (6*45mm)
Washer,Nut
（
M6)
Qty.
8
SAFETY INFORMATION
Solid fuels shall not be burned in this appliance.
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
This appliance has been tested to and complies with the ANS Z21.97-2010, Outdoor DecorativeGas
Appliances CGA CR 9 7-003 Outdoor Gas Fireplaces. The installation must conform to local codes or
the absence of local codes to the National Fuel Gas Code ANSIZ223.1.
This manual contains
important information about the assembly, operation and maintenance of this fire pit. Generalsafety
information is presented in these first few pages and is also located throughout the manual. Keepthis
manual for future reference and to educate new users of this product. This manual should be read
in conjunction with the labeling on the product. Safety precautions are essential when any mechanical
or propane fueled equipment is involved. These precautions are necessary when using, storing and
servicing. Using this equipment with the respect and caution demanded will reduce the possibilities of
personal injury or property damage. The following symbols shown below are used extensively
throughout this manual. Always heed these precautions, as they are essential when using any
mechanical or fueled equipment.
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
DANGER
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the appliance and
immediately call your gas supplier or fire department.
DANGER
Failure to comply with the precautions and instructions
provided with this fire pit can result in death, serious
bodily injury and property loss or damage from
hazards of fire, explosion, burn, asphyxiation, and/or
carbon monoxide poisoning. Only persons who can
understand and follow the instructions should use or
service this fire pit.
L
Bolt (M8)
Nut (M8)
Washer
Spring
Washer
Qty. 4
O
Wrench
Qty.
1
1
P
Q
Glass Beads
Bolt (6*15mm)
Washer
Qty.
4
