1of3
Tools
Required:
Flathead
screwdriver,
Phillips
screwdriver,
Shovel,
Electrical
tape,
Wire
cutter,
Safety
glasses,
Wire
strippers
and
proper
length
wires
(not
supplied).
Estimated
Assembly
Time:
30-45
minutes
Preparation:
Identify
and
inspect
all
parts
before
beginning
installation.
Check
package
content
list
and
diagrams
below
to
be
sure
all
parts
are
present.
If
any
parts
are
missing
or
damaged,
do
not
attempt
to
assemble,
install,
or
operate
the
fixture.
Contact
customer
service
for
replacement
parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Package Contents
B
Small Allen Wrench
x 1
A
Big Allen Wrench
x 1
C
Anchor Bracket
x 1
D
Allen Bolt
x 3
E
Lock Ball
x 3
F
Washer
x 3
Lock Washer
x 3
G
Hex Nut
x 3
H
Anchor Bolt
x 3
I
J
Allen Set Screw
x 4
K
Post Fitter
x 1
L
Upper Post
x 1
M
Middle Post
x 1
N
Bottom Post
x 1
STEP 1
Assemble Anchor Bolts to the Anchor Bracket
-
A. Remove all Lock Washers (G), Hex Nuts (H) and Lock Balls (E) from
the Anchor Bolts (I).
B. Screw the threaded end of each Anchor Bolt (I) in the Mounting
Bracket (C) making sure to that the Anchor Bolt (I) is 1.75” to 2”
extended from the bottom of the Bracket (C).
C. Place a Lock Washer (G) over the Anchor Bolt (I) and then thread the
Hex Nut (H) onto each Anchor bolt (I). Securing the Bracket (C) in
place maintaining the 1.75”-2” length of the Anchor Bolt (I).
1.75” - 2”
H
G
C
I
C
G
H
I
Figure 1
STEP 2
Install Anchor
Bolts in the ground
-
A. Dig a hole in the ground at
the desired location for the
Post Mount.
B. Use cement to secure the
Anchor Bolts (I) into the
ground making sure that
the Bracket (C) is flush on
top of the cement and level
Anchor at the desired
grade with the ground. This
is the base for the Post
Mount.
Tube
Cement
Earth
Earth
Wires
1.75” - 2”
Dia. 9-11/16”
Bolt
Bolt Circle
C
I
Figure 2
Installation Instructions:
UQL
1
1
9
1
www.urbanambiance.com
