HIKVISION KD94X3, Руководство пользователя

Страница: 61 / 90

2. Slide Enable Motion Detection to enable the function.
Note
If the motion detection function is disabled, you cannot draw the detection area
and adjust the sensitivity.
3. Click Draw Area. Click and drag the mouse on the window to draw a motion
detection area. Click Stop Drawing to finish the drawing.
Clear Area Click Clear All to clear all of the areas.
Adjust
Sensitivity
Move the slider to set the sensitivity of the detection.
The higher the number, the higher the sensitivity.
Note
When the sensitivity is 0, motion detection will not work.
4. Set the arming time. The device defaults to arming all day. Click the time period
of arming, you can display and adjust the arming time of motion detection.
Note
• If other time periods need to be set to the same arming time, click the green
copy button on the right side of the timeline.
• You can configure the start time and end time of 8 time periods in detail in
one day.
5. Set linkage method as Notify Surveillance Center, and motion detection can link
the alarm.
6. Click Save to enable the settings.
Event Linkage
When an event occurs, you can specify the event linkage.
Steps
1. Click Settings → Event → Basic Event → Event Linkage to enter the settings
page.
Face Recognition Door Station with 8-inch Screen User Manual
48