HIKVISION KD94X3, Руководство пользователя

Страница: 39 / 90

5 Door Station Local Operation
5.1 Door Station Local Configuration
Hold the menu page, enter the password and tap OK to enter the configuration
page.
5.1.1 Edit Network Parameters
After activating, you should edit the network parameters. Set the IP address of the
door station and the IP address of the door station associated device, to realize the
network communication between the devices.
Steps
1. Long tap on the menu page, enter the password and tap OK to enter the settings
page.
2. Tap Network Settings to enter the network parameter settings page.
3. Edit the relevant parameters according to the prompts: IP address, subnet mask
and address gateway.
4. Exit the settings page.
5.1.2 Door Station Settings
Edit the parameters of the door station (including but not limited to, phase No.,
building No., floor No.).
Steps
1. Hold the menu page, enter the password and tap OK to enter the settings page.
2. Click Local Settings to enter the settings page.
3. Set the parameters of the door station (including but not limited to, phase No.,
building No., unit No., floor No., serial No. and community No.).
4. Enable Auto Screen Brightness, or set Screen Brightness manually.
5. Optional: Enable Channel Mode according to your needs.
Face Recognition Door Station with 8-inch Screen User Manual
26