Network Traffic Camera User Manual
53
2.
Check Enable License Plate Enhancement. Level adjustable from 0 to 100.
3.
Check Contrast Enhancement.
1)
Select mode as On, Time, Brightness.
Time:
Activate the function on schedule. Set the start time and end time.
Brightness:
Active the function automatically. Set the brightness threshold.
2)
Set enhancement level from 0 to 100. Higher value means stronger effect.
3)
Set Halo Suppression Level from 0 to 100. Higher value means stronger effect.
12.4
Configure ICR
Purpose:
IR Cut Filter is used to block or reflect infrared wavelengths but pass visible light.
This series of cameras support auto switch of ICR to realize the 24-hour surveillance.
Note:
ICR configuration is not supported by all camera models of this series.
Steps:
1.
Go to
Configuration > Device Configuration > Image Parameters > ICR
.
2.
Select
ICR Mode
.
Do not Switch
,
Auto-switch
,
Manual Switch
, and
Scheduled
Switch
are selectable.
Do not switch
: The ICR always stays in day mode by default.
Auto Switch
: The ICR switches according to the brightness. Adjust
Threshold
from 0 to 100.
Figure 12-4
Auto-Switch
Manual Switch:
If you set the ICR mode as Manual Switch, it offers you an
option to select day or night.
Figure 12-5
Manual Switch
Содержание iDS-TCM403-AI
Страница 1: ...User Manual of Network Traffic Camera 0 Network Traffic Camera User Manual...
Страница 74: ...73 Figure A 1 2 Modify Network Parameters...
Страница 75: ...74 UD13303B...