Network Traffic Camera User Manual
31
Steps:
1.
Select
Synchronization Mode
as
NTP Synchronization
.
Figure 8-9
NTP Synchronization
2.
Configure the following settings:
Server Address:
IP address of NTP server.
NTP Port:
Port of NTP server.
Interval:
The time interval between the two synchronizing actions with NTP
server.
Note:
If the camera is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the National
Time Center (IP Address: 210.72.145.44). If the camera is set in a customized
network, NTP software can be used to establish a NTP server for time
synchronization.
4.
Click
Save
to save the settings.
Configuring DST (Daylight Saving Time)
Steps:
1.
Go to
Configuration > Device Configuration > System Configuration > DST
.
2.
Check
Enable
DST
.
3.
Set
Start Time
,
End Time
, and
DST Bias
.
4.
Click
Save
to save the settings.
Содержание iDS-TCM403-AI
Страница 1: ...User Manual of Network Traffic Camera 0 Network Traffic Camera User Manual...
Страница 74: ...73 Figure A 1 2 Modify Network Parameters...
Страница 75: ...74 UD13303B...