Network Traffic Camera User Manual
51
The camera supports dual-shutter. One shutter for video image and the other one for
capture image. You can configure shutter parameters for video image.
Steps:
1.
Go to
Configuration
>
Device Configuration
>
Image Parameters
>
Video
.
Figure 12-2
Video Image Configuration
2.
Adjust
Brightness
[0 to100].
Brightness
describes bright of the image, which ranges from 1 to 100.
3.
Adjust
Contrast
[0 to 100].
Contrast
describes the contrast of the image, which ranges from 1 to 100.
4.
Enter
Shutter Speed
[80 to 20000 μs]
.
Shutter speed
describes the length of time when the film or digital sensor inside
the camera is exposed to light, also when a camera’s shutter is open when taking a
photograph. The amount of light that reaches the film or image sensor is
proportional to shutter speed.
5.
Adjust
Gain
[0 to 100].
Gain
of image can be manually configured from 0 to 100. The bigger the value is,
the brighter would the image be, and the noise would also be amplified to a larger
extent.
6.
Select
3D DNR
.
Содержание iDS-TCM403-AI
Страница 1: ...User Manual of Network Traffic Camera 0 Network Traffic Camera User Manual...
Страница 74: ...73 Figure A 1 2 Modify Network Parameters...
Страница 75: ...74 UD13303B...