Network Security Control Panel User Manual
42
Demonstration:
E.g., the user password
is 1234.
LCD Display
Press
the
user
password: [1] [2] [3]
[4].
xxxx*60
Press [*] to enter the
working mode.
Press [6] [0] to enter
the zone testing mode.
Press [#] to confirm
the operation.
If the operation is successful,
Operation Succeeded
If
the
operation
is
failed,
Operation Failed
The function of zone testing is only available under the status of disarming and
non-fault of the zone. The system will do auto-arming in the zone testing mode without
reporting any CID log. The siren will start warning after the alarm is triggered and stop
warning if the alarm is dismissed.
If the zone is disarmed, it will exit the zone testing mode automatically.
2.3.22
Test Report Manually Relaying
Function: You can relay test report manually. One operation generates one test report. It is
used to test the communication between the control panel and center after installing the
system or during the inspection.
Command:
［
User Password
］
+
［
*
］
+
［
6
］
+
［
1
］
+
［
#
］