Network Security Control Panel User Manual
36
Demonstration:
E.g., the master code is
1234, and the user No. is
001.
LCD Display
Press the master code: [1]
[2] [3] [4].
xxxxProject10001
Press [Project] to enter
the project mode.
Press [1] [0] to the mode
for entering the user’s
card No..
Press the user No.: [0] [0]
[1].
Press [#] to confirm the
operation.
If the operation is successful,
Operation Succeeded
If the operation is failed,
Operation Failed
2.
Swipe the card, and the keypad will exit the matching mode automatically.
Deleting Appointed Matched Card
Command: [Master Code] + [Project] + [1] + [1] + [User No.] + [ # ]