Non-Visible Panic Alarm Station Configuration Guide
16
Figure 3-13 Intercom Parameters Configuration
2. Select the Protocol as SIP Protocol or Private Protocol.
3. Click Save.
The device will reboot automatically after switching the protocol successfully.
3.2.9 Set Integrate Protocol Parameters
If you need to access to the device through ONVIF protocol, you can configure the ONVIF user to
enhance the network security.
Steps
1. Click
to enter the Remote Configuration page, go to Network → Open Network Video
Interface.
Figure 3-14 Open Network Video Interface
2. Check Enable Open Network Video Interface.
3. Click Add to configure the user.
4. Edit the users.
Delete
Delete the selected user(s).
Edit
Edit the selected user(s).
