Non-Visible Panic Alarm Station Configuration Guide
12
Figure 3-6 SIP Setting Page (Private Protocol)
Figure 3-7 SIP Setting Page (SIP Protocol)
Registration Status
Display the status of the device registers to the SIP server.
2. Select the Server as IP Address or Domain Name.
3. According to the selected address type, enter the IP address or domain name of the SIP server.
4. Set the Server Port and the Local Listening Port.
Server Port
The SIP server port. By default, the server port of SIP protocol is 5060, and the server port of
private SIP protocol is 5065. The available port number should be between 1024 and 65535.
Local Listening Port
The local port of the device SIP function. By default, it is 5060, the available server port
number should be between 1024 and 65535.
5. Configure the SIP parameters according to the selected intercom protocol.
–
If configuring the SIP parameters based on Private Protocol, please set the Device ID, Device
Local Information, Local Listening Port, Register Period (min) and Network Type.
–
If configuring the SIP parameters based on SIP Protocol, please enter the Register User
Name, Registration Password and Target User Name.
Device ID
Device ID is the unique identification of the device, facilitating the communication between
the devices.
Device Local Information
You can enter the position information of the device for easy management.
Register Period (min)
