HIKVISION DS-K1T690 Series, Руководство пользователя

Страница: 88 / 176

3. Click Device Management to enter the Device Management interface.
4. Add the device to the client software.
Note
For details about adding device, see Add Device.
5. Call the client software.
1) Tap on the device initial page.
2) Enter 0 in the pop-up window.
3) Tap to call the client software.
6. Tap Answer on the pop-up page of the client software and you can start two-way audio between
the device and the client software.
Note
If the device is added to multiple client softwares and when the device is calling the client
software, only the first client software added the device will pop up the call receiving window.
7.12.2 Call Center from Device
Steps
1. Get the client software from the supplied disk or the official website, and install the software
according to the prompts.
2. Run the client software and the control panel of the software pops up.
3. Click Device Management to enter the Device Management interface.
4. Add the main station and the device to the client software.
Note
For details about adding device, see Add Device.
5. Set the main station's IP address and SIP address in the remote configuration page.
Note
For details about the operation, see the user manual of the main station.
6. Call the center.
-
If you have configured to call center in the Basic Settings , you can tap to call the center.
-
If you have not configured to call center in the Basic Settings , you should tap → to call
the center
7. Answers the call via the main station and starts two-way audio.
Note
The device will call the main station in priority.
DS-K1T690 Series Face Recognition Terminal User Manual
74