HIKVISION DS-K1T690 Series, Руководство пользователя

Страница: 128 / 176

Figure 8-18 Access Control and Elevator Control
2. Check Enable Elevator Control.
3. Set the elevator parameters.
Elevator No.
Select an elevator No. for configuration from the drop-down list.
Elevator Controller Type
Select an elevator controller from the drop-down list.
Interface Type
Select a communication type from the drop-down list for elevator communication.
If you select RS-485, make sure you have connected the device to the elevator controller with
RS-485 wire.
If you select Network Interface, enter the elevator controller's IP address, port No., user
name, and password for communication.
Negative Floor Capacity
Set the negative floor number.
DS-K1T690 Series Face Recognition Terminal User Manual
114