HIKVISION DS-K1T690 Series, Руководство пользователя

Страница: 130 / 176

Enable Temperature Detection
When enabling the function, the device will authenticate the permissions and at the same
time take the temperature. When disabling the device, the device will authenticate the
permissions only.
Over-Temperature Alarm Threshold (Max./Min.)
Edit the threshold according to actual situation. If the detected temperature is higher or
lower than the configured parameters, an alarm will be triggered. By default, the value is
37.3°.
Temperature Compensation
If the measured temperature is higher/lower than the actual object's temperature, you can
set the compensation temperature here. Available range: -99 °C to 99 °C.
Door Not Open When Temperature is Abnormal
When enabling the function, the door will not open when the detected temperature is higher
or lower than the configured temperature threshold. By default, the function is enabled.
Temperature Measurement Only
When enabling the function, the device will not authenticate the permissions, but only take
the temperature. When disabling the function, the device will authenticate the permissions
and at the same time take the temperature.
Capture White Light Picture
After enabling Temperature Measurement Only, you can enable Capture White Light
Picture. After enabling this function, the device will capture white light picture.
Measure Area Settings
Configure the temperature measurement area.
Unit
Select a temperature unit according to your preference.
4. Click Save.
Black Body Settings
The black body can correct the measuring temperature. You should set the black body parameters
if the black body temperature measurement scene is required. If no black body is required, do not
set the black body parameters, or the temperature may not correct.
Steps
1. Click Configuration → Temperature → Black Body Settings .
DS-K1T690 Series Face Recognition Terminal User Manual
116