HIKVISION DS-K1A801EF Скачать руководство пользователя страница 82

Страница: 82 / 126

Fingerprint Time Attendance Terminal

In this interface, you can set alarm linkage modes of the access host, including case
trigger, event card interact, and client interact.

Case Trigger

Purpose:

The case (refer to the triggers of the controller) can be linked to some actions (e.g.,
alarm output, host buzzer) when it is triggered.

Steps:

Click the Case Trigger tab to enter the case trigger interface, and select a case.

Check the checkbox of the corresponding linkage actions and set the property as

Trigger

to enable this function.

Host Buzzer

: The audible warning of controller will be triggered.

Reader Buzzer

: The audible warning of card reader will be triggered.

Alarm Output

: The alarm output will be triggered for notification.

Door (Open/Close)

: The door will be open or closed when the case is triggered.

Click the

Save

button.

Click the

Apply

button to take effect of the new settings.

Note:

The Door cannot be configured as open or closed at the same time.

Event Card Interact

In the Interact Configuration interface, click the

Event Card Interact

button to enter

the settings interface.



Event Linkage

In the Event Interact interface, the linkage alarm action, after triggering alarm event,
can be set. The alarm event can be divided into four types: event device, event input
alarm, door event, and card reader event.

Steps:

Click the Event Card Interact tab to enter the event card interface

Содержание DS-K1A801EF































































































































Результаты поиска

Содержание DS-K1A801EF

Отзывы:

Похожие инструкции для DS-K1A801EF

Бренды по названию

Популярные бренды

HIKVISION DS-K1A801EF, Руководство пользователя

Результаты поиска

Содержание DS-K1A801EF

Отзывы:

Похожие инструкции для DS-K1A801EF

Бренды по названию

Популярные бренды