HIKVISION DS-C12L Series, Руководство пользователя, Страница: 39 / 43

Chapter 5 System Configuration
System configuration includes device time, security, device name and device No. configuration.
5.1 Configure the Device Name and Device No.
A device name or device No. identifies a device from other devices. You can customize the name or
No. as needed.
Steps
1. On the Device Management interface, select the desired device in the list and click Remote
Configuration.
2. Click System → General .
3. Change the Device Name or Device No. as needed.
4. Click Save.
5.2 Configure Device Time
If your device time is incorrect, set the time zone or manually synchronize time to correct the time.
Steps
1. On the Device Management interface, select the desired device in the list and click Remote
Configuration.
2. Click System → Time .
Figure 5-1 Configure Device Time
3. Select a time zone where your device is located.
4. Optional: To synchronize your device with other devices on the same network, enable NTP and
configure Server Address, NTP Port, and Sync Interval.
Video Wall Controller User Manual
30