HIKVISION DS-C12L Series, Руководство пользователя, Страница: 22 / 43

2.3.2 Activate on SADP
You can use SADP (Search Active Device Protocol) software to activate one device or activate
multiple devices in batches. The SADP software can automatically search out online inactivated
devices.
Before You Start
You have obtained and installed the SADP software.
Steps
1. Run SADP software to search the online devices.
2. Check Device Status from the device list, and select Inactive device.
3. Set a password and confirm it.
Caution
We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including upper case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or weekly can
better protect your product.
4. Click Activate.
Device Status changes into Active.
5. Optional: Change the network parameters of the device in Modify Network Parameters.
2.4 Add Your Device to Client
After activation, you need to add your device to the client for configuration, management, and
maintenance.
• If you have activated your device on the client, your device has already been added to the client
automatically and then skip this section.
• If you have activated your device on SADP, you need to add it to the client. For details, see the
later sections.
2.4.1 Add an Online Device
If your device is activated with its default IP address kept, the client will automatically search out
your device for you to add it to the client.
Before You Start
• You have installed the Video Wall Client.
• The computer running the client software is on the same network segment with your device.
Video Wall Controller User Manual
13