HIKVISION DS-C12L Series, Руководство пользователя, Страница: 31 / 43

Figure 3-4 Link Decoding Outputs
2. Optional: To change the linking relationship, click the desired window and click Cancel to cancel
the linking relationship in the window, or click Cancel All to cancel all linking relationships of the
video wall.
Note
• The decoding outputs of the same device must be linked to the same video wall.
• If your devices are cascaded, the first window on the upper left must be used to link the
decoding output of the master device. Otherwise, an error may occur.
3.2 Display Signal Sources on the Video Wall
After the video wall is created and configured, you can display the signal sources onto the video
wall. Only local signals are supported.
3.2.1 Preview Signal Sources
Before displaying signal sources onto the video wall, you can preview the signal sources and check
if the signal sources are desired.
Steps
1. Click Video Wall to enter the video wall management interface.
2. Click Live View List, select the desired device from Device Group and view the signals.
Video Wall Controller User Manual
22