HIKVISION DS-C12L Series, Руководство пользователя, Страница: 21 / 43

No. Application Scenario How to Connect Cable
• Connect the LAN interface of your device to the network
with a network cable for power supply over PoE.
• Turn on the power switch, and use the power adapter to
connect the DC 12 V input interface to a socket.
2.3 Activate Your Device
You are required to activate your device first before using it. Choose either of the following two
ways for activation:
• Activate on SADP
• Activate on Client
2.3.1 Activate on Client
You can install and log in to the Video Wall Client to activate your device.
Before You Start
• You have installed the Video Wall Client.
• The computer running the client software is on the same network segment with your device.
Steps
1. Run and log in to the client.
2. Click Device Management. Online devices on the same network segment are searched out and
displayed in the lower area.
3. In the device list, select the desired device in Inactive status, and click Activate.
4. Set a password and confirm it.
Caution
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
After being activated, the device turns into Active.
Video Wall Controller User Manual
12