User Manual of Network Fisheye Camera
68
Before you start:
The authentication server must be configured. Please apply and register a user name
and password for 802.1X in the server.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers and special characters) in order to
increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
Steps:
1.
Enter the 802.1X Settings interface:
Configuration >
Network > Advanced Settings > 802.1X
Figure 5-34
802.1X Settings
2.
Check the
Enable IEEE 802.1X
checkbox to enable the feature.
3.
Configure the 802.1X settings, including EAPOL version, user name and
password.
Note:
The EAPOL version must be the same with that of the router or the switch.
4.
Enter the user name and password to access the server.
5.
Click
Save
to finish the settings.
