User Manual of Network Fisheye Camera
62
responsibility of the installer and/or end-user.
Directory
: In the
Directory Structure
field, you can select the root directory,
parent directory and child directory. When the parent directory is selected, you
have the option to use the Device Name, Device Number or Device IP for the
name of the directory; and when the Child Directory is selected, you can use the
Camera Name or Camera No. as the name of the directory.
Upload type:
To enable uploading the captured picture to the FTP server.
Anonymous Access to the FTP Server
(in which case the user name and
password won’t be required.):
Check the
Anonymous
checkbox to enable the
anonymous access to the FTP server.
Note:
The anonymous access function must be supported by the FTP server.
3.
(Optional) You can click the
Test
button to test the settings.
4.
Click
Save
to save the settings.
Note:
If you want to upload the captured pictures to FTP server, you have to
enable the continuous snapshot or event-triggered snapshot on
Capture
setting
page. For detailed information, please refer to the
Section 6.2.
5.3.8
Email Settings
Purpose:
The system can be configured to send an Email notification to all designated receivers
if an alarm event is detected, e.g., motion detection event, video loss, video tampering,
etc.
Before you start:
Please configure the DNS Server settings under
Configuration >
Network > Basic
Settings > TCP/IP
before using the Email function.
Steps:
1.
Enter the
TCP/IP Settings (
Configuration >
Network > Basic Settings >
TCP/IP
)
to set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and
the Preferred DNS Server.
