background image

Quick Start Guide of Blazer Express Station 

Quick Start Guide 

COPYRIGHT ©2017 Hangzhou Hikvision Digital Technology Co., Ltd.   

ALL RIGHTS RESERVED. 

Any and all information, including, among others, wordings, pictures, graphs are the properties of 

Hangzhou  Hikvision  Digital  Technology  Co.,  Ltd.  or  its  subsidiaries  (hereinafter  referred  to  be 
“Hikvision”).  This  user  manual  (hereinafter  referred  to be  “the  Manual”)  cannot  be  reproduced, 
changed,  translated,  or  distributed,  partially  or  wholly,  by  any  means,  without  the  prior  written 

permission  of  Hikvision.  Unless  otherwise  stipulated,  Hikvision  does  not  make  any  warranties, 

guarantees or representations, express or implied, regarding to the Manual. 

About this Manual 

This Manual is applicable to Blazer Express Station. 

The Manual includes instructions for using and managing the product. Pictures, charts, images and 

all  other  information  hereinafter  are  for  description  and  explanation  only.  The  information 

contained  in  the  Manual  is  subject  to  change,  without  notice,  due  to  firmware  updates  or  other 

reasons. Please find the latest version in the company website (

http://overseas.hikvision.com/en/

).   

Please use this user manual under the guidance of professionals. 

Trademarks Acknowledgement 

and other Hikvision’s trademarks and logos are the properties of Hikvision in 

various jurisdictions. Other trademarks and logos mentioned below are the properties of their 

respective owners. 

Legal Disclaimer 

TO  THE  MAXIMUM  EXTENT  PERMITTED  BY  APPLICABLE  LAW,  THE  PRODUCT 
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS 
IS”,  WITH  ALL  FAULTS  AND  ERRORS,  AND  HIKVISION  MAKES  NO  WARRANTIES, 
EXPRESS  OR  IMPLIED,  INCLUDING  WITHOUT  LIMITATION,  MERCHANTABILITY, 
SATISFACTORY  QUALITY,  FITNESS  FOR  A  PARTICULAR  PURPOSE,  AND 
NON-INFRINGEMENT  OF  THIRD  PARTY.  IN  NO  EVENT  WILL  HIKVISION,  ITS 
DIRECTORS,  OFFICERS,  EMPLOYEES,  OR  AGENTS  BE  LIABLE  TO  YOU  FOR  ANY 
SPECIAL,  CONSEQUENTIAL,  INCIDENTAL,  OR  INDIRECT  DAMAGES,  INCLUDING, 
AMONG  OTHERS,  DAMAGES  FOR  LOSS  OF  BUSINESS  PROFITS,  BUSINESS 
INTERRUPTION,  OR  LOSS  OF  DATA  OR  DOCUMENTATION,  IN  CONNECTION  WITH 
THE  USE  OF  THIS  PRODUCT,  EVEN  IF  HIKVISION  HAS  BEEN  ADVISED  OF  THE 
POSSIBILITY OF SUCH DAMAGES. 
REGARDING  TO  THE  PRODUCT  WITH  INTERNET  ACCESS,  THE  USE  OF  PRODUCT 
SHALL  BE  WHOLLY  AT  YOUR  OWN  RISKS.  HIKVISION  SHALL  NOT  TAKE  ANY 
RESPONSIBILITIES  FOR  ABNORMAL  OPERATION,  PRIVACY  LEAKAGE  OR  OTHER 
DAMAGES  RESULTING  FROM  CYBER  ATTACK,  HACKER  ATTACK,  VIRUS 
INSPECTION,  OR  OTHER  INTERNET  SECURITY  RISKS;  HOWEVER,  HIKVISION  WILL 
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.   
SURVEILLANCE  LAWS  VARY  BY  JURISDICTION.  PLEASE  CHECK  ALL  RELEVANT 
LAWS  IN  YOUR  JURISDICTION  BEFORE  USING  THIS  PRODUCT  IN  ORDER  TO 
ENSURE  THAT  YOUR  USE  CONFORMS  THE  APPLICABLE  LAW.  HIKVISION  SHALL 
NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE 
PURPOSES.   
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE 
LAW, THE LATER PREVAILS.

Содержание Blazer Express 16




























Отзывы: