ID3000 Series Smart Code Reader User Manual
60
Max Output Length
It sets the max. code length that can be outputted.
Code Offset Num
It sets the range of barcode to be filtered. For example, the barcode is ABCDEFG, if you set this
parameter as 2, the device will output CDEFG at last and filter AB.
Begin with Specific Character for Result
If this parameter is enabled, the device will only read the barcodes which begin with a specific
character. Otherwise, the barcodes will be filtered out. You can enter the specific character in
Begin with.
Include Specific Character in Barcode
If this parameter is enabled, the device will only read the barcodes which include a specific
character. Otherwise, the barcodes will be filtered out. You can enter the specific character in
Character.
Exclude Specific Character in Barcode
If this parameter is enabled, the device will only read the barcodes which exclude a specific
character. Otherwise, the barcodes will be filtered out. You can enter the specific character in
Character.
Min. Code Length
If the length of a barcode is shorter (in terms of the number of characters contained in the
barcode) than the configured value, the device will not parse the contents of the barcode. The
valid value is from 1 to 256. For example, if you set the value as 6, the device will not parse the
contents of the barcodes which contain less than 6 characters.
Max. Code Length
If the length of a barcode is longer ((in terms of the number of characters contained in the barcode)
than the configured value, the device will not parse the contents of the barcode. The valid value
is from 1 to 256. For example, if you set the value as 9, the device will not parse the contents of
the barcodes which contain more than 9 characters.
Read Times Threshold
If the reading results of a barcode is same for the configured times, the barcode will be regarded
as valid and its reading result will be outputted. Or the barcode will be regarded as invalid and its
reading result will not be outputted.
De-duplication Enable
If it is enabled, the repeated code information will be filtered within specific trigger times. You
can set trigger times in De-duplication Windows Size, and its default value is 1.
De-duplication By ROI
If it is enabled, the device will filter information based on drawn ROIs.