ID3000 Series Smart Code Reader User Manual
36
6. (Optional) Enable ROI Link IO Enable in Algorithm Control, and there will be prompts by the
output device when codes are not read in any ROI.
Note
●
Make sure that the output device is connected when using this function.
●
The figures above are for reference only, and refer to the actual conditions.
8.2.3 Set 1D Algorithm Parameter
Click All Features on the upper-right to display all algorithm parameters. In the Algorithm
Parameter page, select 1DCode as Arithmetic Type, and then you can set its corresponding
parameters.
Note
●
You should have selected at least one type of 1D code.
●
For different models of the device, the specific parameters may differ, and the actual device you
purchased shall prevail.
Timeout Value
Timeout value refers to the maximum running time of algorithm, and its unit is ms. The code
reader will stop parsing the images and return results if the time is exceeded the waiting time
configured.
Code Color
It defines the readable code color. White Code On Black Wall means that the client software can
recognize the white code with black background. Black Code On White Wall means that the client
software can recognize the black code with white background.
Code 39 Check
Enable this parameter if Code 39 uses the parity bit.
Note
You need to select Code 39 in Add Barcode.
ITF 25 Check
Enable this parameter if ITF 25 uses the parity bit.
Note
You need to select ITF 25 in Add Barcode.
Code Score Enable
If it is enabled, the device will evaluate code quality and display overall grade and code score in
history record area of the client software. The higher the score, and the better the code quality.
