manualshive.com logo in svg

HighLine RCH Mower, Руководство оператора

Поделиться
Скачать
HighLine RCH Mower Скачать руководство пользователя страница 7

Section 1 - Safety

Page 1-2

SAFETY SIGN-OFF FORM

Highline Manufacturing Ltd. follows the general Safety Standards specified by the American
Society of Agricultural Engineers (ASAE) and the Occupational Safety and Health Administration
(OSHA). Anyone who will be operating and/or maintaining the Highline RCH Mower should read
and clearly understand all Safety, Operating and Maintenance information presented in this
manual.

Do not operate or allow someone to operate this equipment until this information has been
reviewed. This information should be reviewed by all operator’s before the season start-up.

This sign-off sheet is provided for record keeping to indicate that the person working with the
equipment has read and understood the information in the Operator’s Manual and has been
instructed in the safe operation of the equipment.

Date

Employee’s Signature

Employer’s Signature

Содержание RCH Mower



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды