HighLine RCH Mower, Руководство оператора

Страница: 19 / 82

Section 2 - Transporting the Mower
Page 2-4
9. Attach Driveline to PTO
Shut off the tractor engine before
at t a c hing PTO dr iv eline.
Entanglement in the rotating
driveline can cause serious injury
or death.
The mower shall not be operated
without the driveline shields in
place.
1) Shut off the tractor engine and remove
the key.
2) Check that the driveline telescopes
easily and that the shields are in good
condition and rotate freely.
3) Lift the tractor PTO shield.
4) Support the driveline, pull back on the
yoke collar, align the splines by
rotating the mower driveline and push
the driveline into the tractor PTO shaft
until the collar snaps into place.
5) Push and pull the yoke several times
to ensure the driveline is locked. Do
not pull on the collar as this will
release the lock.
6) Lower the tractor & hitch PTO shields
into place.
10. Attach Hydraulics
- The tractor must be equipped with 3
spool control valves (SCV) to control
the deck rotation, winging up and
down and height control.
- Clean the end of the hoses (1) and the
connection.
- Firmly push the hoses into the tractor
receptacle according to user
preference.
- Route the hoses so they do not
interfere with moving parts.
Attach Driveline to PTO
108006
Attach Hydraulics and Lighting 108008C