manualshive.com logo in svg

HighLine RCH Mower, Руководство оператора

Поделиться
Скачать
HighLine RCH Mower Скачать руководство пользователя страница 10

Section 1 - Safety

Page 1-5

DO NOT CONTACT ROTATING DRIVELINE

Contact with rotating driveline will cause serious injury or death.
Keep all driveline guards in place.
Securely attach drivelines at both ends.
Check that the driveline guards turn freely on driveline.

DO NOT OPERATE WITH SHIELDS MISSING

DO NOT CONTACT ROTATING BLADES

Rotating blades can cause serious injury or death.
Always disengage power take off, shut off tractor, remove key, set
park brake and wait for all parts to stop turning before servicing.
Keep guards in place and in good condition.

DO NOT OPERATE MOWER WITH WINGS RAISED

Contact with exposed rotating blades may cause injury or death.
Rotating blades may throw objects, causing injury or death

STAND CLEAR OF WINGS

Falling wings can cause serious injury or death.
Wing cylinders must be fully retracted and wing lock pins in place
before servicing.
Never stand under wings when lowering or raising.

Содержание RCH Mower



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды