HighLine RCH Mower, Руководство оператора

Страница: 33 / 82

Section 3 - Mower Preparation
Page 3-10
18. Inspect the wing skid shoe for secure
mounting and wear.
The mower shall not be operated
without the skid shoes in place.
- If the leading edge (1) of the skid shoe
is worn excessively or is damaged, it
can be exchanged with the skid shoe
from the other wing.
19. Ensure the driveline clutches will slip
under an excessive load by checking
that there is a gap between the tabs of
the pressure plate (1) and the clutch
housing (2).
- If the tabs are against the housing,
replace the friction discs in the clutch.
Refer to the Maintenance Section for
procedures.
- All new clutches and those that have
not been operated for approximately
30 days need to be run in. Refer to the
“Run in of the Friction Clutch” in the
Maintenance Section.
20. Ensure the driveline shields are
lowered into place and in good repair
to prevent injuries.
The mower shall not be operated
without the driveline shields in
place.
‘
Read and understand the Operator’s
Manual and all decals.
‘
Ensure that shields, guards and locks are
in good working order.
‘
Lubricate all grease fittings and check the
fluid level in all gear boxes. See
Maintenance Section.
‘
Ensure all fasteners are tightened.
Inspect Skid Shoe
108106C
Clutch-Gap Between Pressure Plate & Housing
107090C