HighLine RCH Mower, Руководство оператора

Страница: 32 / 82

Section 3 - Mower Preparation
Page 3-9
14. Set the Preferred Cutting Height
- Lower the wings.
- Raise the mower to the preferred
cutting height.
- Install a number of height stops (1)
around the cylinder rod to achieve
the preferred cutting height.
15. Inspect All the Hydraulic Cylinders.
- Ensure the proper size pins are in
place and secured.
- Check for hydraulic leaks on the
cylinders, along the hydraulic lines
and at the tractor.
Use a piece of cardboard or
heavy paper to check for leaks.
Do not use your hand. Wear
proper hand and eye protection
when searching for leaks.
Relieve pressure on hydraulic
system before repairing, adjusting
or disconnecting.
16. Check the Condition of the Chain
Guards all around the machine.
The mower shall not be operated
without the chain guards in place
or in good condition.
- Replace worn, missing or broken
sections immediately.
17. Inspect the wheels and tires for
damage or foreign objects. Repair or
replace as necessary.
Height Stops Installed
108012C
Inspect Hydraulic Cylinders and Hoses
108013
Check Condition of the Chain Guards
107037