HighLine Feed Chopper 1251, Руководство оператора

Страница: 33 / 37

Section 3 - Maintaining the Feed Chopper
Adjust Twine Scrapers on Rotor Shaft
219160C
Rotor Twine Scraper Adjustment
Adjust the twine scrapers (3) on both ends of
the rotor shaft.
- Loosen the bearing bolt nuts (4) that
have the twine scraper on it to allow
the bearing bolts to be loose.
- Slide the twine scraper (3) on the
bearing bolts until it is almost touching
the rotor shaft.
-
Do not have the scraper touching
the rotor shaft.
-
To ensure clearance, use a
flashlight to check for a visible
sliver of light between the edge
of the twine scraper and the
rotor shaft.
- Tighten the bearing bolt nuts (4) to
fasten the scraper in place.
-
Torque to 65 lb-ft (88 Nm).
Page 3-8