HighLine Feed Chopper 1251, Руководство оператора

Страница: 22 / 37

Section 2 - Operating the CFR 1251 Feed Chopper
Unplugging the Feed Chopper
1. Reduce the engine speed to idle.
2. Disengage tractor power take off (PTO).
3. Set the tractor park brake.
Shut off tractor engine and remove
the key.
Wait for all components to stop
rotating.
Do not place hands in the Feed
Chopper while the rotor is turning.
Contact with the rotating knives will
cause serious injury.
4. Disengage the chopper drive clutch.
Do not place hands in the Feed
Chopper drive clutch area while
turning. Contact with the rotating
large pulley or clutch pin/plate can
cause serious injury.
To disengage the clutch:
-
Pull the clutch pin (2) out and rotate
until the roll pin is resting on the top of
the tab (3).
.
- Ensure the clutch pin (2) is out of the
engagement plate (1).
Pull Clutch Pin from the Engagement Plate
219152C2
Page 2-7