Highland T560, Техническое руководство

Страница: 24 / 49

24 T560MANK5.DOCX
Long Form Short Form Function
QDELAY 45u QDELAY 45u
set all four (“quad”) delays
QD 45u QD 45u
set all four (“quad”) widths
INSTALL IN
apply all pending channel settings
AUTOINSTALL 1 AU 1
automatically apply pending settings
AUTOINSTALL 0 AU 0
cancel automatic mode
UNDO UN
cancel all pending channel settings
TLEVEL 1.25 TL 1.25
set external trigger level
TLEVEL TL
query trigger level
TRIGGER POS TR PO
trigger on external rising edge
TRIGGER NEG TR NE
trigger on external falling edge
TRIGGER INT TR IN
select internal 80 MHz trigger
TRIGGER SYN TR SY
select internal DDS synthesizer
TRIGGER REMOTE TR RE
select remote trigger
TRIGGER OFF TR OF
disable triggers
TRIGGER HIZ TR HI
trigger input is 10K to ground
TRIGGER
TERMINATE TR TE
trigger input is terminated at 50 ohms
TDIV 5000 TD 5000
set trigger divisor
TDIV TD
query trigger divisor
TRIGGER TR
trigger setup query
FIRE FI
fire remote trigger
FEOD FE
force End Of Delay, abort timing cycle
SYNTHESIZE
3.579M SY 3.579M
set optional DDS synthesizer rate
SYNTHESIZE SY
query DDS synthesizer rate
CLOCK HIZ CL HI
clock connector is unused
CLOCK OUT CL OU
connector outputs 10 MHz
CLOCK IN CL IN
external 10 MHz is accepted
CLOCK CL
query clock settings and temperature
CTRIM 2048 CT 2048
set 10 MHz clock trim, 0...4095
CTRIM CT
query clock trim value
CLOCK SAVE CL SA
save clock trim to flash memory
BNUM 555 BN 555
set burst N, pulses output in burst
BMOD 2000 BM 2000
set burst M, total triggers/cycle
BURST ON BU ON
enable burst mode
BURST OFF BU OF
disable burst
BURST RESET BU RE
reset burst counters
GATE OFF GA OF
disable gate functions
GATE OUTPUT GA OU
make gate connector an output