Highland T560 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 49

Highland T560 Скачать руководство пользователя страница 11

11

T560MANK5.DOCX

3.3.

Crystal Oscillator Timebase

The standard T560 includes a 10 MHz VCXO crystal oscillator timebase. It is factory-set to
an accuracy of ±1 PPM and may be expected to drift less than 2 PPM per year. A trim DAC
is provided to allow user commands to readjust the oscillator frequency as desired, with the
setting stored in nonvolatile memory.

A connector is provided which allows the internal oscillator to provide a 10-MHz output, or
allows an external 10-MHz source to be accepted. This allows multiple T560s to be
synchronized to each other or to an external 10-MHz reference. The external clock levels
are 3.3 volt square-wave CMOS logic levels. The T560 can lock to an externally-applied
square wave of 10 MHz +-50 PPM, 3.3 to 5 volt positive logic levels, or to a 1 volt RMS sine
wave.

The long-delay (millisecond range) jitter performance of the T560 is dominated by the
phase noise of the internal crystal oscillator or the equivalent phase noise of a user-
provided external reference.

Custom versions may include a higher-precision OCXO timebase. Multiple T560 units may
be locked to one another to ensure timing coherence.

Figure 3-1 T560 Basic Block Diagram

«
...
9
10
11
12
13
...
»

Содержание T560


















































Отзывы:

Нет отзывов