APPLIANCE OPERATION MANUAL
21-
The gas valves, injectors, venture`s, ignition system and burners are accessed by removing the hob from the
appliance.
Always disconnect the power supply from the unit before commencing work.
For the Ceran Glass models the base fixing clamps need to be removed from below so that the appliance can be
raised out of the opening and the screws removed around the sides.
For the stainless steel hob it can be removed by taking off the dome nuts and lifting the hob up.
Remove the burner caps and ventures as shown in the following image. Unscrew the retaining rings in the
burners and then remove the burner bases. Disconnecting the spark electrode leads in the process. Remove the
three screws that hold the Wok sealing ring in place, and remove the sealing ring.
SERVICING INSTRUCTIONS
PLEASE READ AND KEEP FOR FUTURE REFERENCE
NOTE:
Servicing is only to be conducted by an authorized agent.
Consult data plate for detailed wiring diagram.