background image

APPLIANCE OPERATION MANUAL

19-

INSTALLATION INSTRUCTIONS – This appliance must be installed by an authorized person.

Your HIGHLAND cook top must be installed in accordance with the installation requirements of the local gas 

and electrical authorities and the appropriate installation requirements of ASNZ5601, wiring regulations of 

ASNZS3000 and any other building requirements. 

The electrical connection for the 240V AC supply is by plug to a switched GPO. Highland models with induction 

must be wired to a 15 Amp switched GPO socket. Do not remove plug and fix wire.

 A 20 mm gap is to be provided around base of unit and models noted as having base surface temperatures 

above 95`C must have a removable barrier fitted below to prevent accidental contact. 

The appliance is not intended to be operated by means of an external timer or separate remote control system.

1. 

Determine the position where your HIGHLAND cook top or BBQ griddle is to be mounted ensuring no 

structural members interfere with the space requirements. Note: Ensure that there is at least 630mm 

clearance between the bench top and any overhead downward facing combustible surface located over the 

cook top (such as a range hood or cupboard) or at least 780mm between the bench top and an overhead 

exhaust fan. Ensure that there is a minimum gap of a least 100mm from the outer edge of the installed cook 

top to any nearby combustible surface.

2. 

Ensure that both gas and electrical outlets are accessible paying particular attention to the routing of the gas 

supply line. Ensure that there will be a minimum of 20mm clearance around the underside of the installed 

cook for ventilation.

3. 

Mark out the required opening in your bench top using the dimensions shown. Ensure that there is a 

minimum 630mm clearance above the cook top. Once the opening has been cut out install the appliance 

and fix into position using the supplied clamping brackets as shown.

INSTALLATION INSTRUCTIONS

PLEASE READ AND KEEP FOR FUTURE REFERENCE

NOTE: 

DO NOT OVER TIGHTEN BRACKETS AS THIS MAY DISTORT THE APPLIANCE

Содержание HDBBQ N





























Отзывы: