manualshive.com logo in svg

Highland HDBBQ N, Руководство по эксплуатации, Страница: 17 / 28

Поделиться
Скачать
Highland HDBBQ N Скачать руководство пользователя страница 17

APPLIANCE OPERATION MANUAL

17-

CARE AND MAINTENANCE

PLEASE READ AND KEEP FOR FUTURE REFERENCE

CLEANING THE BARBEQUE

1. 

After operation remove the griddle plate, when 

cool, and either clean in the dishwasher or the 

sink with warm soapy water.

2. 

To remove excess fats from inside the appliance 

we recommend boiling a jug of water and carefully 

pouring approximately 1.0 litre down the inside(s) 

of the appliance with the griddle plate removed, 

but with the ceramic glass cover and the front and 

rear glass supports still in place.

3. 

Carefully reassemble the appliance after cleaning 

ensuring that the glass supports are correctly 

positioned over the acorn nuts, the curved 

ceramic glass is supported by the two glass 

supports, the catchment draw is in place and the 

griddle is installed and located on the acorn nuts.

NOTE: 

ONLY PERFORM THIS PROCEDURE WITH THE CERAMIC COVER STILL IN PLACE 

as the ceramic burner should not come in contact with excess water. The water, fats 

and oils will then collect in the catchment draw underneath the appliance.

CAUTION: 

should be exercised when removing the catchment drawer while it is still 

full of hot water. We recommend that the water in the catchment draw be allowed 

to cool before disposal. The catchment draw can then be placed in a dishwasher for 

cleaning, or wash in the sink with warm soapy water.

The curved ceramic glass and the glass supports can be removed and placed in a 

dishwasher for further cleaning or hand wash in the sink. The ceramic glass can be 

further cleaned using a commercial ceramic glass cleaner and a soft cloth together 

with a razor scraper where necessary

Содержание HDBBQ N





























Отзывы:

Нет отзывов