High End Systems SolaSpot Pro 1500, Руководство пользователя

Страница: 34 / 43

l
Use the [UP],[DOWN] buttons to scroll to Auto Program menu and press [Enter] to select.
l
Use the [UP],[DOWN] buttons to scroll to Master and press [Enter] to select. Your choice will be shown in the display.
Set to Slave
After a preset program is defined on a Master fixture, other SolaSpot Pro CMY fixtures on the same DMX link can be designated
laves to playback Program Part 1, 2 or 3 as defined on the Master fixture.
To designate a fixture as a Slave:
l
Navigate to and select the Preset menu.
l
Use the [UP],[DOWN] buttons to scroll to Playback menu and press [Enter] to select.
l
Use the [UP],[DOWN] buttons to scroll to Set To Slave menu and press [Enter] to select.
l
Use the [UP],[DOWN] buttons to scroll to Slave1, Slave2, or Slave3 option and press [Enter] to select.
l
Your choice will be shown in the display.
DMX Control
Selecting this option reverts the function from Auto Program (Preset Programming) to DMX Receive (console control). Selecting
this option will take you back to the menu startup screen where DMX Receive will be displayed as the currently selected function.
Music Control
This Playback option lets you designate a fixture to playback scenes based on audio triggers detected by the internal microphone in
stand alone or as a Master.
Alone is the default setting.
Edit Scenes
A parameter is a fixture attribute that can be controlled to modify the light beam in terms of color, beam quality and pattern, intensity,
or focus (position). DMX programming assigns a DMX value to each of the fixture’s parameters. A scene is one combination of para-
meter settings.
SolaSpot Pro 1500 fixtures provide 250 pre-programmed scenes you can use or edit to build a preset program. The first 64 scenes
ave factory created settings which can be edited as desired.
Edit Scene Parameters
The Edit Scenes option lets you select a DMX value for any of the 35 parameters in the SolaSpot Pro 1500 DMX protocol.
To edit the DMX parameters in a scene:
l
Navigate to and select the Preset menu as shown on page 35.
l
Use the [UP],[DOWN] buttons to scroll to the Edit Scenes option and press [Enter] to select.
l
Use the [UP],[DOWN] buttons to scroll to the Scene number you wish to build on from 1-250 and press to [Enter] select.
l
Use the [UP],[DOWN] buttons to scroll to the parameter you wish to edit (Pan, Tilt, MSpeed, Color Wheel, etc.) and press to
[Enter] select.
Use the [UP],[DOWN] buttons to scroll to a new DMX value for the parameter you have selected and press [Enter] to select. This
takes you back to parameter options. Continue through all parameters until your desired look is complete.
l
When you are finished selecting all parameter values for a particular Scene, press the [MODE/ESC] button to return to the
Preset level menu.
34