High End Systems SolaSpot Pro 1500, Руководство пользователя

Страница: 14 / 43

Safety Considerations
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely
necessary for the user to follow the safety instructions and warning notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability
for any resulting defects or problems.
l
If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The
condensation could cause damage to the device. Leave the device switched off until it has reached room temperature.
l
This device falls under protection-class I. Therefore it is essential that the device be earthed.
l
The electrical connection must carry out by a qualified person.
l
Make sure that the available voltage is within stated range.
l
Make sure the power cord is never crimped or damaged by a sharp edge. Replace cable immediatly if damaged, this work
must be done by an authorized dealer.
l
Always disconnect from power, when the device is not in use or before cleaning it. Only handle the power cord by the plug.
Never pull out the plug by tugging the power cord.
l
Don't project the beam onto combustible substances, as this causes a safety hazard.
l
Please be aware that damages caused by manual modifications will void warranty.
l
Keep away from children and non-professionals.
l
Maintenance
l
There are no serviceable parts inside the device except for the lamp. The following points have to be considered when
inspecting the fixture for maintenance:
l
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
l
Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.
l
The electric power supply cables must not show any damage, material fatigue or dirt.
14