High End Systems SolaSpot Pro 1500, Руководство пользователя

Страница: 27 / 43

With this function, you can select pan degree for 630 or 540.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until“Set”is displayed. Press ENTER, the display
will show“Set”. Tap the <Up/Down>button until the display will show “Status”. Press ENTER, the display will show “Status”.
2
．
Press <Up/Down>, the display will show “Pan Degree”.
3
．
Press< ENTER>, the display will show “Pan Degree”.
4
．
The display show “540”,Press <Up/Down>, the display will show “630”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Encoders
With this function, you can feedback switch of pan movement or tilt movement.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until“Set”is displayed. Press ENTER, the display
will show“Set”. Tap the <Up/Down>button until the display will show “Status”. Press ENTER, the display will show “Status”.
2
．
Press <Up/Down>, the display will show “Encoders”.
3
．
Press< ENTER>, the display will show “Encoders”.
4
．
The display show “ON”,Press <Up/Down>, the display will show “OFF”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Pan/Tilt Spd
With this function, you can select scan mode from 1 to 4.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until“Set”is displayed. Press ENTER, the display
will show“Set”. Tap the <Up/Down>button until the display will show “Status”. Press ENTER, the display will show “Status”.
2
．
Press <Up/Down>, the display will show “Pan/Tilt Spd”.
3
．
Press< ENTER>, the display will show “Pan/Tilt Spd”.
4
．
The display show “Speed 1”,Press <Up/Down>, the display will show “Speed 2”, “Speed 3”, “Speed 4”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Mic Sens.
With this function, the default is 70%, you can select the desired microphone sensitivity from 0 % to 99 %.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until“Set”is displayed. Press ENTER, the display
will show“Set”. Tap the <Up/Down>button until the display will show “Status”. Press ENTER, the display will show “Status”.
2
．
Press <Up/Down>, the display will show “Mic Sens.”.
3
．
Press< ENTER>, the display will show “Mic Sens.”.
4
．
The display show “70%”,Press <Up/Down>, the display will show “0~99%”.
5
．
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Hibernation ——Standby mode
The lamp and step motors will be power off if the fixture stay without DMX signal for 15 mins (Factory default).And the fixture will be
reset before working once it receive DMX signal again.
1
．
Tap <MODE/ESC>button
，
access the main menu
，
Tap the <Up/Down>button until“Set”is displayed. Press ENTER, the display
will show“Set”. Tap the <Up/Down>button until the display will show “Status”. Press ENTER, the display will show “Status”.
2
．
Press <Up/Down>, the display will show “Hibernation”.
3
．
Press< ENTER>, the display will show “Hibernation”.
27